Page 21
5. The display
Temp._actual_value
Active display
area
Use
Main display
for operating values, navigation using the scroll icons. In the event
of a fault or a service message, the HygroMatik logo changes to a display field
which describes the fault or the service requirement.
Scroll keys, used to display the following operating values:
•
Temp._actual value [°C]
•
Temp._set value [°C]
, can be changed using the on-screen keyboard*)
after tapping on it
1)
•
Steam_actual_unit [kg/h]
•
Steam_output_max. [%]
•
Demand [%]
•
Control_signal_internal [%]
•
Output signal [V]
•
Current_actual_Cyl. 1[A] (only for electrode steam humidifier ELDB)
•
Current_actual_Cyl. 2 [A] (only for ELDB double cylinder units)
•
Water_level_cyl. [mm] (only for heater steam humidifier HKDB)
•
Water_level_cyl. 2 [mm] (only for HKDB double cylinder units)
•
Essence_selection1 (1... 4, if enabled)
1)
the display and option to change the temperature set value is not available with
weekly timer operation; with the following exception: If "ECO" is selected for the
steam generation, the temperature set value display is also available in the
weekly timer operation.
*)
On-screen keyboard for changing the Temp._set value;
is displayed after tapping on the temperature set value display and is used for the
direct input of the set value
Confirm the input and save using the check mark in the top right, cancel using the
"X" in the top left
Temp._set value [°C]
Max.: 49.0
Min: 2.0
Active area
Icons for status display
