Figure 13 - Electrical Actuator - Bridge Rectifier (Part No.
304.209.001)
Removable Electrical Actuator
(Bridge Rectifier)
The removable electrical actuator locates to the top of the
container valve�� 24 v dc is required for solenoid operation��
Provision is made for the connection of a manual actuator
to the top of the actuator assembly�� Due to the design of
the bridge rectifier it will operate regardless of how it is
wired up; the positive supply from control panel can be
connected to either terminal 1 or 2 with the reverse for the
negative supply�� The removable electrical actuator has a
life span of 10 years from manufacture, which is indicated
on the label��
Technical Information
Body:
Mild Steel & Dull Nickel
Swivel nut:
Brass CZ121
Actuation Pin:
Stainless Steel
Actuation Type:
Latching
Reset Requirement:
Manually via Reset Tool
supplied
Connection:
1” BSPP Brass
Nominal Voltage:
24 v dc
Nominal Current:
0.2 A
Max. Monitoring Current:
2 mA
Manual Actuation Force:
0 N (11.24 Ibf)
Nominal Pin Travel:
4.4 mm (0.17”)
Electrical connection:
3-pin plug connector
Back EMF Protection:
Bridge Rectifier
Certification:
UL Recognised
Overall Size:
104mm (L) x 44mm (Dia)
(4.09” (L) x 1.73” (Dia))
Weight:
0.9 kg (2.09 lbs)
Technical Information
Body:
Mild Steel & Dull Nickel
Swivel nut:
Brass CZ121
Actuation Pin:
Stainless Steel
Actuation Type:
Latching
Reset Requirement:
Manually via Reset Tool
supplied
Connection:
1” BSPP Brass
Nominal Voltage:
24 v dc
Nominal Current:
0.2 A
Max. Monitoring Current:
2 mA
Manual Actuation Force:
0 N (11.24 Ibf)
Nominal Pin Travel:
4.4 mm (0.17”)
Electrical connection:
3-pin plug connector
Back EMF Protection:
Suppression Diode
Certification:
UL Recognised
Overall Size:
104mm (L) x 44mm (Dia)
(4.09” (L) x 1.73” (Dia))
Weight:
0.9 kg (2.09 lbs)
Figure 12 - Electrical Actuator - Suppression Diode (Part No.
304.20.010)
Removable Electrical Actuator
(Suppression Diode)
The removable electrical actuator locates to the top of the
container valve�� 24 v dc is required for solenoid operation��
Provision is made for the connection of a manual actuator
to the top of the actuator assembly�� The suppression
diode electrical actuator must be wired up correctly with
the positive supply from the control panel connected to
terminal 1, and the negative supply connected to terminal
2��The removable electrical actuator has a life span of 10
years from manufacture, which is indicated on the label��
1
SECTION 2 - SYSTEM COMPONENTS
FM-200® (UL/FM)
14A-07H
02
2010-03
