HYDROSCAND H24BASIC, User Manual

Page: 11 / 35

11
H24/H32BASiC USER MAnUAL EDiTiOn i 2018-02-05
note!
Ensure that the die set pins are inserted correctly in the master die holes. Retract the dies
immediately if you see that the die set pins lie outside of the hole. pay attention! Mistakes
can lead to extensive repairs.
4.8 Crimping
1. Once the desired die set is mounted and crimping diameter is set, place
the hose application between the dies.
2. press and hold the Crimping push button until the indicator lamp is
lit up.
3. press the Opening push button until the hose application is free.
4. Measure the crimped connector and make adjustments if necessary.
WARnInG!
Pinch point! Keep hands
clear of the dies when
crimping!