HYDROSCAND H24BASIC, User Manual

Page: 10 / 35

10
H24/H32BASiC USER MAnUAL EDiTiOn i 2018-02-05
1. Locking pin
2. Die
3. Die change tool
3
2
1
1 Die size marking
2. Die set pin
3. qC - tool
4. Hole for qC Tool
3
2
1
4
4.7 Changing die sets with the QC-tool
The qC-tool allows you to change entire die sets in just one step.
1. Fully contract the dies together to zero (0). insert the qC-tool in the holes for the
qC change tool in the contracted dies and then completely retract (return) the
dies. insert the die set in its storage compartment (qC-stand or qC-plate) and
turn the tool counter-clockwise until it stops. Remove the tool.
2. insert the qC-tool in the desired die set and turn clock-wise until it stops. pull out
the die set and mount them in the machine.
3. Contract the dies* together until you hear or feel that they click in place.