HYDROSCAND H24BASIC, User Manual

Page: 14 / 35

14
H24/H32BASiC USER MAnUAL EDiTiOn i 2018-02-05
6. trouble shooting
Problem
Machine starts but cylinder will
not move:
Low crimping force:
inconsistent crimping
measurements:
Machine will not start:
1. Incorrect motor
rotation.
2. Low oil level.
3. Electrical/mechanical
failure
1. insufficient lubrication.
2. Low oil level.
3. Faulty pressure relief valve
4. Electrical/mechanical
failure
5. insufficient lubrication.
6. the machine need to
be recalibrated.
7. Linear sensor
malfunction.
1. no power.
2. Motor protection
function has been
triggered.
Change direction of motor rota -
tion.
Add oil.
Service is required,
contact Hydroscand
Machine AB.
Lubricate.
Add oil.
Check hydraulic pressure.
Adjust or change valve
Service is required,
contact Hydroscand
Machine AB.
Lubricate.
perform calibration.
Check/Change.
check fuses and connection.
Check motor protection in elec -
tric box.
Reason Solution