HYDROSCAND H120BASIC, User Manual

Page: 8 / 29

Page 8
h120bASIc uSEr mAnuAL EdItIon II 2016-12-28
3.4 User Interface
1. control device h120bASIc.
2. Teach in ( Push ”Teach in button” once to memorizing the opening diameter )
3. Push button opening.
4. Push button crimping.
5. Socket for foot pedal and electrical backstop. Foot Pedal, plug in
and it will work as ”Push Button Crimp”.
6. main power switch.
7. Button for Power / Reset the emergency stop.
8. Filter alarm indicator lamp (optional).
1
2 3 4
6 7 8
5
4. Calibration
The machine is equipped with a simple calibration function. Use the calibration tool to perform a
simple calibration.
If the actual crimping measurement differs too much from the set crimping measurements
then calibrate the machine, perform this with die set size 19.
1. Insert a die set size 19 into the machine.
2. Turn the adjustment dial to 0. Check image below.
3. Use the calibration tool that followed with H120BASIC and PUSH ”Teach In and crimp
button” together until the dies meet the calibration tool and tool shold be locked before
the LED indicator fl ashes, if not please repeat 3.
4. Simple calibration is done.
Locking mechanism to lock
the set crimping measurement