HYDROSCAND H120BASIC, User Manual

Page: 10 / 29

Page 10
h120bASIc uSEr mAnuAL EdItIon II 2016-12-28
5.6 Die sets
5.7 Changing die sets
1. Return the dies as much as possible by pressing the Man open button twice. (Stops at the
first press at the set opening diameter)
2. Remove the die segment by using the enclosed changing tool and pull the knob until the
segment releases.
3. be sure to check that the set (consisting of 8 segments) is clean, that there are no
damages and that they all have the same number. The label should be facing you and the
dies should be inserted from the front. Insert the die by pulling the knob, push the pin in
the die into the hole in the machine and then release the knob to lock the die segment.
4. check that all the dies are positioned correctly in the machine.
Locking Pin
Die Set
QC tool
Die Set Crimping area
32-10
32-12
32-14
32-16
32-19
32-22
32-26
32-30
32-34
32-39
32-45
32-51
32-57
32-63
32-69
32-74
32-78 10-12 mm
12-14 mm
14-16 mm
16-19 mm
19-22 mm
22-26 mm
26-30 mm
30-34 mm
34-39 mm
39-45 mm
45-51 mm
51-57 mm
57-63 mm
63-69 mm
69-74 mm
74-78 mm
78-87 mm