HYDROSCAND H120BASIC, User Manual

Page: 5 / 29

Page 5
h120bASIc uSEr mAnuAL EdItIon II 2016-12-28
the machine is delivered with:
• Rearview mirror
• Calibration mandrel
• Grease gun
• Grease tube for the dies
• Tool for changing dies
• Instruction manual
• Certifi cate of conformity according to CE standard
3.1 Warranty
the warranty lasts one (1) year from purchase and only under the strict condition that the manual
instructions have been followed. The warranty covers faulty material/parts and fl awed workmanship,
replacing faulty parts cost.
the warranty does not cover improper use or normal wear. travel costs, time for repair and shipping
costs are not covered by the warranty. Repairs under the warranty are to be made only by Hydroscand
Machine AB or an authorized service technician approved by Hydroscand Machine AB. Lost income or
extra costs that may arise for any reason are not covered by the warranty.
note!
Ensure that the machine is undamaged and that all of the described items are present upon arrival or
shortly after. Hydroscand Machine is not liable for incorrect or missing parts that are not reported
within eight (8) days after delivery.
3.2 Important
h120bASIc is designed, constructed and protected for crimping hydraulic hose in sizes
3/16 ” - 2”. Any other use is considered as improper and Hydroscand Machine AB takes no
responsibility for injury to persons, property or machinery in this case. The machine should only be
used for crimping hydraulic hose as specifi ed. Hydroscand Machine AB’s guidelines for working
conditions and restrictions of use and the health and safety laws must be followed.
Warning !
Pinch point!
Keep hands and all other body parts away
from the red-indicated area while crimping.