Hydac SMU 1200, Operating Instructions Manual

Page: 51 / 100

Configuring the SMU
SensorMonitoring Unit - SMU en(us) Page 51 / 100
BeWa SMU1200 3854281 V2.0x en(us) 2013-08-20 2013-08-20
PowerUp Menu
In the PowerUp menu, the basic settings for the operation of the SMU are
made.
Selection To do
Start the PowerUp menu
Press any button and hold it down while
switching on the supply voltage
Exit the PowerUp menu without
saving
Scroll to
CANCEL
and press
o.k.
, or
the option will be selected automatically
after 30 seconds
Exit the PowerUp menu after
saving.
Scroll to
SAVE
and press
o.k.
PowerUp Description For details
see page
DAtTIM Set the system date/time 52
ADRESS
Set the bus and IP address of the
SMU 53
REcMOD Set the data recording 55
DElMEM
Delete the records 56
SENS A
Selection of the PowerUp menu of
the sensor connected to sensor
interface A (CS1000 or MCS1000) 57
SENS B Selection of the PowerUp menu of
the sensor connected to sensor
interface B (AS1000) 59
SEnADR Set the sensor address
automatically 60
DFAULT Reset to factory defaults 61
CANCEL Discard changes and exit 62
SAVE Save changes and exit 62
Press the
o.k.
key to change to a sub-menu.