Hydac SMU 1200 Operating Instructions Manual Download Page 71

Page: 71 / 100

Configuring the SMU

SensorMonitoring Unit - SMU

en(us)

Page 71 / 100

BeWa SMU1200 3854281 V2.0x en(us) 2013-08-20

2013-08-20

SENS B – Sensor B Measuring Menu

Under SENS B, you have the option of moving into the Measuring menu with
the sensor connected to sensor interface B.
You can find a description of the menu items in the Operating and
Maintenance Instructions for the sensor.

The AS has no Measuring menu. This item is provided for use
with other sensors.

If no Measuring menu is
available for the sensor that is
connected, then the message
NO.MENU for will appear for
~ 2 seconds.

NoMENU

If no sensor is connected to the
sensor interface B, then
NO.SENS will be displayed.

NoSENS

CANCEL

With CANCEL, you discard all changes and exit the Measuring menu.
Use the following buttons:

Change to the next
option in the menu

o.k.

Confirm

Esc

Cancel and back

CANCEL

Summary of Contents for SMU 1200





































































































Search results

Summary of Contents for SMU 1200

Reviews:

Related manuals for SMU 1200

Brands by name

Popular brands

Hydac SMU 1200, Operating Instructions Manual

Search results

Summary of Contents for SMU 1200

Reviews:

Related manuals for SMU 1200

Brands by name

Popular brands