Scrolling through the displays
SensorMonitoring Unit - SMU
en(us)
Page 45 / 100
BeWa SMU1200 3854281 V2.0x en(us) 2013-08-20
2013-08-20
Service variables (only for CS1000)
These values give you information about the current flow and the LED
brightness within the CS1000 Sensor. The service variables are not
calibrated.
Service variable "Flow"
Display
Description
108
Here, you can see the averaged flow
through the ContaminationSensor unit
(e.g. 108 ml/min)
Service category "Out"
Display
Description
1§8
Here you can see the value emitted as
analog output signal (example: 13.8 mA)
Service variable "Drive"
Display
Description
42
Display of the current LED brightness (1-
100%) in the ContaminationSensor
(example: 42%).
Service category "Temp"
Display
Description
2)5C
Display of the media temperature
indirectly measured in the
ContaminationSensor. The display takes
place dependent on setting in °C or °F
(example: 29.5 °C)
The measurement may deviate from the
AS1000 measurement if a measurement
point deviates or if measurements are
taken indirectly.
