manualshive.com logo in svg

Hydac SMU 1200, Operating Instructions Manual

Share
Download
Hydac SMU 1200 Operating Instructions Manual Download Page 59

 

Configuring the SMU

 

SensorMonitoring Unit - SMU 

en(us) 

Page 59 / 100

BeWa SMU1200 3854281 V2.0x en(us) 2013-08-20 

2013-08-20

 

SENS B – Sensor B PowerUp menu 

Under SENS B, you have the option of accessing the PowerUp menu with 
the sensor connected to sensor interface B. 
You can find a description of the menu items in the Operating and 
Maintenance Instructions for the sensor. 

 

The AS1000 has no PowerUp menu. This item is reserved for 
use with other sensors. 

 
The message NO.MENU will 
appear if no PowerUp menu is 
available for the connected 
sensor. (Display for 
~ 2 seconds). 

NoMENU

 
If no sensor is connected to 
the sensor interface B, then 
NO.SENS will be displayed. 
This display will go out after 10 
seconds provided that the 
SMU status (LED) is green. 

 
Factory setting: 

Consult the operating and servicing 
instructions for the sensor that is connected. 

 

Summary of Contents for SMU 1200





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands