HYDAC International OFT-HV Operating And Maintenance Instructions Manual Download

Page: 17 / 28

Page 17 of 28 – Operation and Maintenance Instructions for Offline Filtration Trolley OFT20 & OFT-HV
Document No: E1412015-1488-M-02

HYDAC Pty Ltd - 109-111 Dohertys Road, Altona North, Victoria 3025, Australia
Telephone: +61 (03) 9272 8900 ; Fax: +61 (03) 9369 8912 ; Website:

www.hydac.com.au

Connecting the Unit

Connecting the Suction Hose

Pull the suction hose (larger diameter) with lance out of the hose rack.

Put the suction hose with lance, without any tension or twists, into the appropriate
container and secure it against falling out.

Connecting the Pressure Hose

Pull the pressure hose (smaller diameter) with lance out of the hose rack.

Put the pressure hose with lance, without tension and or twist, into the appropriate
container and secure it against falling out.

To avoid air from entering the medium during operation, make sure
that the pressure hose and lance are always below the oil level.

OFT20 OUTLET
OUTLETINTLET

OFT20 INLET
IIIINLETUTLET

OFT-HV OUTLET
OUTLETINTLET

OFT-HV INLET
IIIINLETUTLET

Summary of Contents for OFT-HV





























Search results

Summary of Contents for OFT-HV

Reviews:

Related manuals for OFT-HV

Brands by name

Popular brands

HYDAC International OFT-HV, Operating And Maintenance Instructions Manual

Search results

Summary of Contents for OFT-HV

Reviews:

Related manuals for OFT-HV

Brands by name

Popular brands