Page 14 of 28 – Operation and Maintenance Instructions for Offline Filtration Trolley OFT20 & OFT-HV
Document No: E1412015-1488-M-02
HYDAC Pty Ltd - 109-111 Dohertys Road, Altona North, Victoria 3025, Australia
Telephone: +61 (03) 9272 8900 ; Fax: +61 (03) 9369 8912 ; Website:
Unpacking the Unit
Before delivery, the unit is inspected for leaks and proper functioning at the factory then
carefully packed for shipment.
When receiving and unpacking the unit, check it for damage in transit. Dispose of the
packaging material in an environmentally-friendly manner.
When unpacking the unit, check it for damage in transit.
Transporting the Unit
NOTICE
Using components for pushing / pulling
The unit will be damaged
► Never use the components to push or pull the unit.
► Use the handles provided for moving.
NOTICE
Unsuitable lifting accessories
The unit/components will be damaged/destroyed
► Use only suitable lifting accessories to raise or lash the unit.
► Take care to ensure that the lifting accessories do not cause any pressures
to be brought to bear against the components on the unit.
Storing the Unit
Make sure to store the OFT Series in a clean, dry place, in the original packing, if
possible. Do not remove the packing until you are ready to install the unit.
Storage temperature:
10°C … 40°C
Relative humidity:
max. 95%, non-condensing
