FCU menus
Designating the measurement point
The measuring position designation is used for conveniently assigning a log
to a measurement site at which a measurement is being or was performed. It
is stored together with the measured results and appears on the log
printouts.
The measurement site designation can be selected from among 20
customizable designations.
The FCU features a memory for entering 20 measurement point
designations. This enables frequently occurring designations to be
permanently configured and called up as needed.
memory
MEMORY 0.0 %
Meas. point
ok
start
Measuring point:
2
Designation 1
Select the
respective
measurement
point via the
keys.
ok
start
Measuring point:
2
Designation 1
The first letter
blinks.
Measuring point:
2
Designation 1
Navigate to the
position desired
using the keys.
Measuring point:
2
Designation 2
Select the
characters from
the table via the
keys.
or
Measuring point:
2
Designation 2
Numbers can be
entered directly
via the keypad.
ok
start
Confirm the designation for the
measurement point.
stop
Abort and exit without saving.
FCU 2000-4 series
en(us)
49 / 120
BEWA FCU2000-4 3109987h en-us 2017-01-24.docx
2017-01-24
