HYDAC FILTER SYSTEMS CSM-E, Installation And Maintenance Instructions Manual

Page: 41 / 64

Performing maintenance
Performing maintenance
WARNING
Operating pressure
Danger of bodily injury
►
The hydraulic system must be depressurized
before performing any work on the hydraulic
system.
The prescribed adjustment, maintenance/servicing and inspection work is to
be conducted in accordance with the respective schedules.
The Unit is to be disconnected from the power supply and protected against
being inadvertently switched back on when performing any maintenance,
servicing, inspection or repair work.
Once maintenance work is complete, check that the safety devices are still
working properly. Any screwed fittings which have been undone/removed are
to be checked to see that they have been properly resecured.
Please note that the following maintenance intervals are guide values. The
maintenance intervals shorten depending on the contamination level of the
fluid.
24 hrs.
or
daily
500 hrs.
or
monthly
3000 hrs.
or
twice per
year
Check for leaks
X
Visual check of electrical
equipment
X
Clean the suction strainer
X
CSM-E en(us) Page 41 / 64
MoWa CSM-E 3911629a en-us 2017-12-11.docx 2017-12-11