HYDAC FILTER SYSTEMS CSM-E, Installation And Maintenance Instructions Manual

Page: 16 / 64

Unpacking the unit
Unpacking the unit
The unit is function- and leak-tested in the factory and properly packed. The
connectors are closed off so that no contamination can enter the unit while it
is in transit.
When receiving and unpacking the unit, check it for damage in transit.
Dispose of the packaging material in an environmentally friendly manner.
Transporting the unit
Only transport the unit as follows:
- Carry the unit by hand holding the pump and fan cover.
- Transport the unit on the rubber buffers in an upright position.
Storing the unit
Rinse and drain the unit completely before putting it into extended storage.
Store the unit in a clean, dry place. Store the unit on the rubber buffers in an
upright position.
CSM-E en(us) Page 16 / 64
MoWa CSM-E 3911629a en-us 2017-12-11.docx 2017-12-11