Hyd-Mech H-40, Operation And Maintenance Manual

Page: 18 / 95

Pg 2.3
H40
CONVEYOR SELECTOR Three maintained positions : OUTFEED, BOTH, and
SWITCH INFEED. Selects the conveyor(s) to move when the
CONVEYOR FORWARD or REVERSE PUSH BUTTONS are
used.
CONVEYOR FORWARD Depressing pushbutton causes selected conveyor's
PUSHBUTTON rollers to rotate in a direction which would move material forward from
behind the saw head toward the front of the machine. Releasing the
pushbutton deactivates conveyor motor(s) and movement will stop.
CONVEYOR REVERSE Depressing pushbutton causes selected conveyor's rollers
PUSHBUTTON to rotate in a direction which would move material toward
the back of the machine. Releasing the pushbutton
deactivates conveyor motor's and movement will stop.
CONVEYOR SPEED Allows for increase or decrease in speed of selected
RHEOSTAT conveyor(s) when FORWARD or REVERSE pushbuttons
are depressed.
BLADE SPEED Allows for increase or decrease of blade speed while
RHEOSTAT blade motor is running.
DIGITAL READOUT Readout displays screens featuring :
i) SFM - blade speed reading in surface feet per minute
FR - head feed rate in inches per minute
ii) HT - height of the head above the table
(lower limit switch)
iii) TIME ELP - cutting elapsed time
TIME REM - cut time remaining before reaching
head down limit.
The screens may be scrolled through by using the + or -
cursor key on the face of the display.