Hyd-Mech H-40, Operation And Maintenance Manual

Page: 35 / 95

Pg 3.4
H40
LUBRICATION
The design of the H-40 were intended to minimize maintenance, although periodically certain moving parts
need lubrication. We recommend that this periodic lubrication be done once a month using any general purpose
grease. In addition to the grease points shown, vise jaw guides and infeed rollers require greasing.
HYD-MECH recomends monthly lubrication.
Four linear bearings
with a grease nipple.
Roller chains.
Apply grease to the four places indicated on the
blade tension assembly.
(Shown with the cover removed.)
Apply grease to all four sides
of the guide arm shaft with it
fully extended.
With the vis(s) closed, apply grease to all four sides of
the vise shaft.