GDS 600 Hospitality Programming Manual Version 1.3.1
16
Program 21 Station Numbering Plan & Port Assignment
- The first area of
programming is to define the station numbering plan for the Hotel. This includes both
administration telephone sets as well as guest telephones. This is a very simple and
straight forward process.
From the web browser open Numbering Plan/Program 21 Port/Station Number.
Port Number
= Cabinet, Card Slot and Circuit. Card slots begin with 0 and end with 9 for
GDS 80 port cabinets. For the GDS 40 cabinet it begins with 2 and ends with 5.
Station Number
- Assign the appropriate station number for admin and guest stations
according to the equipment type and port desired.
Name
- You may assign names to stations as desired. If the PMS feature is used then the
PMS package will add and remove the guest names on check in and out.
Type
- This is system generated and does not need to be changed except for use of
virtual ports which will be discussed later.
NOTE
: For the DSS Console a _XXX as the station number will appear automatically.
Give the DSS console the same station number as the telephone to which it will be used
with.
NOTE
: It is suggested you install your digital station cards in the first slots and then add
your single line station cards for guest rooms after that.
After you are finished press the SAVE key.
