HYBREX GDS-600 Programming Manual Download | Manualshive

Page: 31 / 63

background image

GDS 600 Hospitality Programming Manual Version 1.3.1

31

Station Class Of Service Programming

-

The following COS options are

identified and should be set accordingly.

Program 46-ST-07

Call forward no answer to voice mail

. When

using the internal voice card set this option to VMU if the station has an assigned mailbox
in the system.

Program 78-ST-04

Call Forward Busy to voice mail

. When using the

internal voice card set this option to VMU if the station has an assigned mailbox in the
system

Program 78-ST-05

Call Forward No Answer Timer

. Note that each

station user may have its own timer for no answer to voice mail. Set as required. If set to
0 it will follow the system wide call forward no answer timer in program 05-01-08.

Note:

Set the DISA transfer no answer timer (05-08-06) LONGER than the call forward

no answer timer if you want calls to go directly to personal mailbox greetings.

Program 07-01-XX

Function 77 New Message Key Function

for

VMU applications. This is a new feature key that allows admin telephones to view new
and saved messages when they have a flashing message indicator. Also, special soft
function keys will appear on F1, F2 and F3 for call options while viewing message status.
In default this is already set under the message key on digital telephone sets.

Program 50 ST-08

0 Guest Telephone 1 Admin Telephones

. It is

critical that you assign the proper class of service for guest telephones vs. admin
telephones. The prompts played differ for guest and admin stations.

Program 46-ST-02

Message Waiting Level

. It is recommended that

you assign a message waiting level so that guest telephones cannot leave a message for
another station in the system. If you set the guest room to 0 then the room phone cannot
leave a message for another station and can ONLY get a message waiting indication
from the console operator or the voice mail system.
Message levels of the same value above 0 can leave messages for one another. Lower
message levels cannot leave messages for higher levels.

Program 07

Feature Assignment for personal mailbox

via access

Code. FN:77 is used for personal mailbox access. Assign FN: 77 to admin phones and
when they press this key it will automatically take them to the log on greeting of their
mailbox.

Program 45-ST-08

Enable SMDR

. Verify that SMDR is enabled for ALL

stations that you wish to generate call records for. It is very important that this feature is
DISABLED for all administration phones. There is a finite amount of memory available to

«
...
29
30
31
32
33
...
»

Summary of Contents for GDS-600
































































Reviews:

No comments

Related manuals for GDS-600

Brand: Samsung Pages: 2

Brand: Samsung Pages: 33

Passport 500 Pro

Brand: Fender Pages: 4

Brand: GAI-Tronics Pages: 24

Brand: GAI-Tronics Pages: 20

Brand: Pacific Sun Pages: 12

Brand: Zazen Pages: 8

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 10

Brand: Panasonic Pages: 56

Brand: Karel Pages: 45

Brand: Sprint Pages: 44

Brand: Skytec Pages: 12

80-6115-00 - AT&T E5813B - 5.8 GHZ Three Handset Answering System

Brand: VTech Pages: 53

SureCross DX99 FlexPower DX99N9X2S0N0R4X0A0

Brand: Banner Pages: 7

Brand: Uniden Pages: 32

Brand: JRC Pages: 110

Brand: GE Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands