Hy-Brid Lifts PA-1030, Operation & Safety Manual

Page: 3 / 36

FOREWORD
THE OPERATION AND SAFETY MANUAL MUST BE
READ AND UNDERSTOOD PRIOR TO OPERATING THE
MACHINE.
ANY MODIFICATION ON THIS MACHINE WITHOUT
THE EXPRESS WRITTEN CONSENT OF THE
MANUFACTURER IS PROHIBITED.
USE OF FALL ARREST SYSTEMS ATTACHED TO
ANCHORAGE POINTS ON EQUIPMENT MAY CAUSE
MACHINE TO TIP, RESULTING IN SERIOUS INJURY OR
DEATH.
Original instructions are written in English
The purpose of this Operations and Safety manual is to provide users with the instructions and operating
procedures essential to properly and safely operate the Hy-Brid Lift for its intended purpose, and to position
personnel and their necessary tools and materials.
• The user/operator should not accept operating responsibility until the manual has been read and
understood as well as having operated the lift under supervision of an experienced and qualified operator.
• Because the manufacturer has no direct control over machine application and operation, proper safety
practices are the responsibility of the user and all operating personnel.
The guardrail system around the perimeter of
the platform is the fall protection system for
manual-propelled Mobile Elevating Work Platforms
(MEWP) per the A92.20/CSA-B354.6:17 Standards.
It is prohibited to use an MEWP manufactured
by Custom Equipment, LLC, with any portion—
or all—of the guardrails removed. Lanyard
anchorage points on this type of equipment
are not required to conform to the applicable
standard. However, if anchorage points for lanyard
attachments are required by site authorities or
other regulations, the anchorage points on all
equipment manufactured by Custom Equipment,
LLC are designed to be used for work positioning
restraints of personnel only. Lanyard lengths are
to be determined by operator/owner to restrict
the operator to the confines within the guardrail
system.
FIGURE 1: Lanyard Attachment
FALL PROTECTION NOTICE
3 OPERATION & SAFETY MANUAL PA1.1-S REV A