Hy-Brid Lifts PA-1030, Operation & Safety Manual

Page: 27 / 36

SECTION 6
OPERATION
6.5 | ELEVATING AND LOWERING
6.6 | INFORMATION INDICATORS
Using Upper Platform Controls
Ensure the key switch on the base controls is in the platform position.
To elevate/lower, push in and hold the enable button. While pushing the enable button push the top part of
the rocker switch to elevate or the lower part of the rocker switch to lower
Using Base Controls
Ensure the key switch on the base controls is in the base position.
To elevate/lower, push in and hold the enable button. While pushing the enable button push the top part of
the rocker switch to elevate or the lower part of the rocker switch to lower.
Power Indicator Light
lluminates when controls have power.
Overload Indicator Light
Flashes when attempting to elevate machine more
than 10% while overloaded.
Battery Indicator Light
When the overload function has not bee triggered
right LED light gives an approximate indication of
battery charge:
Not Illuminated: 100% to 40%
Slow Flash: 40% to 20%
Fast Flash: 20% to 10%
Steady: Less than 10%
27 OPERATION & SAFETY MANUAL PA1.1-S REV A