Hy-Brid Lifts PA-1030, Operation & Safety Manual

Page: 22 / 36

SECTION 5
TRANSPORT, HANDLING & STORAGE
Maintenance locks must be engaged prior to inspecting or servicing the unit when the platform is elevated.
Inspect machine for any possible damage during shipment; perform a pre-delivery inspection. See checklist in
the Maintenance Manual. Reset emergency stop switches, if necessary.
5.1 | PRELIMINARY UNPACKING INSTRUCTIONS AND DEALER INSPECTION
After periods of storage, exposure to extremes of ambient conditions-heat, cold, moisture, dust etc., inspect
the machine. Refer to the Pre-Delivery/ Frequent Inspection Checklist in the Maintenance Manual.
5.2 | STORAGE
• Lower the work platform to the down position.
• Turn key switch to off position.
• Check entire machine for loose or unsecured items. Remove any loose items from machine.
• Apply manual brake lock on rear wheels.
• For safety and controlled handling, it is not recommended to move the unit on a slope greater than 5°.
5.3 | TRANSPORTATION
Fork lift pockets are provided on the side of the unit for loading and unloading. When moving machine with a
forklift, do not let machine slide along floor. Bring forklift to a stop and then gently lower the machine.
5.4 | FORK LIFT POCKETS
FIGURE 10: Fork Lift Pocket
PUSH-AROUND SERIES PA-1030 22