Hy-Brid Lifts PA-1030, Operation & Safety Manual

Page: 11 / 36

SECTION 2
SAFETY
2.5 | SAFETY CONTROLS
Auxiliary Lowering: Descent - Manual Override
For manually lowering the scissors in the case of power failure, a manual valve on the pump is provided. To
lower the scissors, pull the cable located at the rear or the machine.
FIGURE 5: Auxiliary Lowering FIGURE 6: Lowering Instructions
Emergency Stop
This lift is equipped with two emergency stop switches, one at the platform control and one at the base
control, that when activated, will render the unit inoperable until reset. To reset, pull the button out. (See the
“Operating Controls & Indicators” section of this handbook for more detail.)
IF PLATFORM SHOULD FAIL TO LOWER, DO
NOT ATTEMPT TO CLIMB DOWN THE BEAM
ASSEMBLY. SERIOUS INJURY MAY RESULT. HAVE AN
EXPERIENCED OPERATOR USE THE EMERGENCY
LOWERING PROCEDURE TO SAFELY LOWER THE
PLATFORM.
PUSHING THE EMERGENCY STOP MAY CAUSE
UNEXPECTED PLATFORM MOVEMENT AS THE
MACHINE COMES TO A SUDDEN STOP. BRACE
YOURSELF AND SECURE OBJECTS ON THE
PLATFORM DURING OPERATION OF THE MACHINE.
11 OPERATION & SAFETY MANUAL PA1.1-S REV A