Hy-Brid Lifts PA-1030, Operation & Safety Manual

Page: 18 / 36

• No Unauthorized Use
• Do not operate this machine unless you have been trained in
safe operation.
• Training includes complete knowledge of the safety and
operating instructions contained in the manufacturer’s
manual, your employer’s work rules, and applicable
government regulations.
• An untrained operator subjects himself and others to death or
serious injury.
• Read and understand all dangers and warning in the
Operations & Safety Manual before operating this machine.
• Improper use of this machine could cause death or serious
injury.
• Inspect machine and make sure that it is operating properly,
that all name plate and hazard signs are in place and
legible, and that the machine is in accordance with the
manufacturer’s maintenance requirements contained in
the operating and maintenance manual and the daily safety
checklist.
• Lanyard anchorage point location. Capacity 1 person
• Lanyard anchorage points are for work positioning restraints
only.
• Use of fall arrest systems attached to anchorage points on
mobile equipment may cause machine to tip, resulting in
serious injury or death.
• Crushing Hazard
• Do not enter the space beneath the work platform or scissor
structure unless the maintenance lock is in place.
• Refer to Maintenance & Troubleshooting Manual
• Only qualified service personnel may service the machine.
Failure to comply with listed safety precautions may result in
machine damage, personnel injury, or death.
• Replace designated items with manufacturer’s specified
equipment only. Failure to use these items may cause
instability and could void the Warranty.
• Batteries produce explosive gas. Charge batteries in a well-
ventilated area.
• Do not expose sparks or flames.
• Do not smoke while charging battery.
• Battery Charger Power Inlet
SECTION 4
DECALS
4.2 | DECAL SYMBOLS
PUSH-AROUND SERIES PA-1030 18