HWM Multilog LX 2, User Manual, Page: 8 / 56

7
Configuring the logger
1. You will now see the main setup menu
(expanded for illustration purposes)
The menu is structured in sections for
easy setup and changes content
depending on type of logger connected
and software mode:
i) Logger Details including ID
and SIM card phone number
ii) Logger start time and data capture interval
(days or time of measurement period)
iii) Logger channel configuration including
calibration factors
(see appendix for info)
iv) Logger recorded meter readings
v) Cellular data service provider settings
vi) Data call settings
Data Destination details, the server address
for the UDP data
vii) Backup call in timing details in case of
main call failure or external battery exhaustion
and SMS message destination number
viii) Alarm configuration
(Advanced mode only)
Final Setup button and
logger time zone selection
Main function buttons
Note that the IDT is regularly updated so may not match the picture above