HWM Multilog LX 2 User Manual Download Page 23 | Manualshive

Page: 23 / 56

HWM Multilog LX 2 User Manual Download Page 23

22

Locating in plastic lidded chambers

Plastic lids usually have a metal plate fitted to the lid sometimes on the back
or internal to the construction of the lid.

Internal aerial loggers may be more suitable for plastic lidded chambers but in
some situations external aerials should be considered.

The frost plug should always be fitted so as not to interrupt radio reception.

Drilling  into  the  side  of a  plastic  chamber  is  not  recommended  and  could  be
dangerous  due  to  the  high  chance  of  damage  to  other  services  in  close
proximity.

Multilog LX 2 Installation in Atplas box

The  design  of  the  Multilog  LX  2  means  it  is  the  correct  size  to  rest  on  the
ledges at the top of an Atplas chamber.

If the logger has an internal antenna, then
it  should  be  mounted  in  an  offset  position
to  avoid  being  directly  underneath  the
metal  plate  moulded  into  the  Atplas
chamber lid.

«
...
21
22
23
24
25
...
»

Summary of Contents for Multilog LX 2

























































Reviews:

No comments