35
5. You will now see a list of all the loggers you have requested.
In this view from Left to Right the list shows:-
i.
The logger serial number
ii.
The logger’s GSM telephone number
iii.
The site ID for the logger
iv.
The number of SMS message credits remaining
v.
The number of GPRS credits remaining
vi.
The number of outgoing message credits remaining
vii.
The number of SMS messages received from the logger
viii.
The number of GPRS messages received from the logger
ix.
The number of messages waiting for additional credits to be
loaded
x.
The date and time that the last message was received from the
logger
xi.
The expiry date for the contract
6. Click either the logger serial number or the site ID for the logger you
wish to examine/configure.
This screen displays the full details about the logger you have chosen,
the example above corresponds to the logger that you configured in
previous sections so you can now see all the data concerning your
logger.
Most information regarding the logger will have been entered for you
already by HWM, but the following steps will show you how to confirm
reception of the GPRS test conducted earlier and how to adjust the
Site details, such as Site ID and GPS position.
Summary of Contents for Multilog LX 2
Page 48: ...47 ...