27
Connecting the flow cable
If you are using a pulse unit (or connecting cable) provided by HWM, then
simply connect it to the FLOW socket on the data logger.
When making a connection to Multilog LX 2 you will normally need to splice
the bare tails together. It is important that a waterproof connector housing is
used, such
as the “Tuff-Splice” enclosure available from HWM.
Final Connection
Note that Long data connections should always be made using screened
cable. The use of screened cable will ensure maximum rejection of
interference from outside sources. Always use a common ground point
without creating ground loops.
See appendix (page 49) for further information on pulse cables
Summary of Contents for Multilog LX 2
Page 48: ...47 ...