54
Fitting your own SIM card
1. Remove the lid of the logger taking care not to damage the seal.
2. Lift out the battery to allow easier access
to the SIM card slot
3. Insert your new SIM into the empty slot as shown above.
Ensure the gold contacts face the board and the notch is to the left.
4. Replace the lid ensuring the screws are retightened to 1.5nm to ensure
the logger remains water tight.
5. Proceed with programming the logger and ensure you enter the new
SIM phone number into the software including the ‘+’ symbol and the
international dialling code with no spaces.
e.g. +4477xxxx.
This is an important step as the logger sends an SMS message to itself
once a month to synchronise its clock. If the wrong phone number is
entered, this can result in an international SMS message being sent.
Summary of Contents for Multilog LX 2
Page 48: ...47 ...
