Field Application Department
2018 . 10 . 02 (r1)
43/63
2) How to disassemble the covers
[HNT-1/1P] Assembly & Disassembly_Covers
2
1. Remove the eight bolt caps and loosen the eight screws and separate the side covers (2)
- You need to separate the cable which is connected to Printer board
2. Loosen the four screws and separate the Rear cover (3)
3. Loosen the ten screws on the Moving base covers bottom side and then separate them (4)
2
3
4
4
1
2
3
3
