Field Application Department
2018 . 10 . 02 (r1)
42/63
[Check the CR Motor and sensor condition]
1. Enter the Engineer mode: Press PRINT -> R -> L -> SETUP button on the main screen
2. Press the Long Run Test -> C-REST ON -> Loop Start
Then you can check the condition both CR Motor and Sensor
3. Press the IQC Test and move the Chin Rest to the end of the bottom and top by chin rest
up/down button, you can check the CR PI condition by (changing letters ex) [H,-] or [-,L])
1) How to check the Head Rest ASSY
[HNT-1/1P] Assembly & Disassembly_Head Rest ASSY
