Field Application Department
2018 . 10 . 02 (r1)
57/63
1. [Dead Pixel Correction]
- Check the dead or hot pixel of camera
2. [Solenoid Control]
- Set / Adjust the Solenoid puffing time and power
3. [Focus LED Setup]
- Set / Adjust the all LEDs brightness
4. [IOP Measure Setup]
- IOP Model eyes setup mode
5. [Track Motor Setup]
- Control tracking motor speed
6. [Target Dist Setup]
- Setup target distance
7. [Pachy Measure Setup(HNT-1P Only)]
- Setup Pachymetry model eyes
8. [Touch Calibration]
- Calibrate touch screen
9. [Focus Align Test]
- Show the focus LED(Ext. and Aim) information
(Size and Position) for alignment
- Show the PSD signal information for alignment
10. [Long Run Test]
- Motor aging test
11. [IQC Test]
- Test for H/W components(LCD, LED, Motor etc.)
12. [Print Engineer Settings]
- Print all engineer settings
13. [Move to Packing Pos]
- Move the head to the packing position
14. [Save factory settings]
- Backup the engineer settings
15. [Restore factory settings]
- Return to the backup settings
[HNT-1/1P] Engineer Setup Mode
