Protocol
Control
System
Users
Manual
2/12/01
Figure 63- Lighting Configuration Screen 4
Figure 62 and Figure 63 show the screens used
to configure the schedule for the lighting circuit.
An ON and OFF time can be entered (24 hour
format) for each day of the week.
8.5.2.7 Auxiliary Configuration
There are two auxiliary functions that can be
configured on the PSC. The first is the ability
to take a temperature input and turn a relay
output ON or OFF if the temperature is
above/below a setpoint. The second is the
ability to monitor two temperatures. Note that
there is no control function associated with the
temperature inputs, but alarms can be set for the
temperature inputs
Figure 64- Aux Configuration Screen 1
Table 36- Aux Configuration Screen 1
Field
Explanation
Temp Setpt
Displays the temperature
setpoint for the auxillary
temp control function
Temp
Deadband
Displays the deadband for
the temp control function
Control
Displays the type of
control, either DIRECT
(relay closes on
temperature above setpoint
+ ½ deadband) or
REVERSE (relay opens on
temperature above setpoint
+ ½ deadband)
Figure 65- Aux Configuration Screen 2
Table 37- Aux Configuration Screen 2
Field
Explanation
Temp Input
Bd/Pt
Displays the input point
assignment (board/point)
for the temperature input
Cntrl Out
Displays the output point
(board/point) assignment
for the output relay.
Figure 66- Aux Configuration Screen 3
Table 38- Aux Configuration Screen 3
Field
Explanation
Low Temp
Alm
Displays the low temp
alarm value. If the
Monitor temp input is
below this value for the
appropriate delay time, an
alarm will be signaled.
High Temp
Alm
Displays the high temp
alarm value. If the
Monitor temp input is
above this value for the
appropriate delay time, an
alarm will be signaled.
Delay
Displays the delay time to
wait before signaling an
alarm (minutes)
Bd/Pt
Displays the input point
(board/point) assignment
for the temperature input.
Page 31