Husqvarna Viking Designer Sapphire 85, User Manual

Page: 35 / 50

Attaching the Sensor One-Step
Buttonhole Foot
1. Snap on the Sensor One-Step Buttonhole Foot.
2. Insert the plug, with the three dots facing out, into the
accessory socket at the back of the sewing head.
Attaching the Sensor Q-Foot
1. Using the screwdriver, remove the presser foot ankle.
2. Place the Sensor Q-foot from behind, and lower the
needle into the opening of the foot by turning the
handwheel towards you.
Position the foot onto the presser foot bar so that the
hole on the foot matches the hole on the presser foot bar.
The arm of the presser foot should rest on top of the
needle screw. Insert the screw and tighten the screw with
a screwdriver.
Interchangeable Dual Feed Foot
The Interchangeable Dual Feed Foot is designed to feed
layers of fabric and/or batting evenly. It is perfect for quilting,
sewing velvet, stretch fabrics, imitation leathers and fabrics
that need precise pattern matching. Snap on the Changeable
Straight Stitch Foot when using the straight stitch in the
center needle position with a stitch length up to 6mm. Snap
on the Changeable Zigzag Foot when selecting stitches up to
7mm wide and 6mm long.
1. Dual Feed
2. Changeable Zigzag Foot Plate
3. Changeable Straight Stitch Foot Plate
Note: Look for optional dual feed accessories in the online accessory
user’s guide at www.husqvarnaviking.com or at your
HUSQVARNA® VIKING® retailer.
Attaching the Dual Feed
1. Use the screwdriver to remove the presser foot ankle.
2. Place the dual feed on your machine from the back,
positioning the fork over the needle clamp screw. Then
screw the dual feed onto the presser foot bar with the
presser foot ankle screw.
1
2 3
1
2
2 Preparations 35