Husqvarna Viking Designer Sapphire 85, User Manual

Page: 30 / 50

Needle threader
The needle threader allows you to thread the needle
automatically. The needle must be in the up position to use
the built-in needle threader.
1. Lower the presser foot.
2. Use the handle to pull the needle threader all the way
down. The threader hook (A) swivels through the needle
eye.
3. Place the thread from the back over the hook (B) and
under the thread hook (A).
4. Let the needle threader gently swing back. The hook
pulls the thread through the needle eye and forms a loop
behind the needle. Pull the thread loop out behind the
needle.
Note: The needle threader is designed to be used for size 70-120 needles.
You cannot use the needle threader for needles size 60 or smaller, the
wing needle, twin needle, triple needle or when the Sensor One-Step
buttonhole foot is attached. There are also some optional accessories that
require manual threading of the needle.
When threading the needle manually, make sure that the needle is
threaded from front to back. The bobbin cover can be used as a
magnifying glass to make threading easier.
A
B
B
A
30 2 Preparations