Husqvarna CRT48-33K, Operator'S Manual

Page: 66 / 108

wc_tx002046gb.fm
66
Maintenance CRT 48-33K
5.17 Engine Oil and Filter
When Change oil and oil filter (d) every 200 hours.
On new machines, change oil after first 50 hours of operation.
Requirements

Engine stopped, but still warm.

Plastic sheet

Container of suitable size to collect drained oil

Fresh engine oil (see Technical Data )
Procedures Follow the procedure below to change the engine oil.
1. Remove oil fill cap (a) and drain plug (b) to drain oil.
2. Re-install drain plug and torque to 35 Nm (25.5 ft.lbs.).
3. Fill engine crankcase with recommended oil until the level reaches the upper
line on the dipstick (c) .
4. Re-install oil fill cap.
Follow the procedure below to replace the oil filter (d) .
1. Drain the engine oil.
2. Remove the installed oil filter.
3. Apply a thin coat of oil to the rubber gasket of the replacement oil filter.
This procedure continues on the next page.
wc_gr008933
a
d
c
b