Husqvarna CRT48-33K, Operator'S Manual

Page: 44 / 108

wc_tx002045gb.fm
44
Operation CRT 48-33K
4.14 Stopping the Machine
Procedure Perform the procedure below to stop the machine.
1. Return the control levers to their neutral positions.
2. Release pressure on the foot pedal.
To stop the engine, turn the key switch to “O” (off).
4.15 Operating Guidelines
Operating
guidelines
Follow the guidelines below to use your Ride-On Trowel to its fullest capacity.

During the break-in period, run the engine at 50% of full throttle. See topic
“Breaking In New Machines.”

Move the machine in the direction that the operator is facing. This will finish the
widest possible area, while giving the operator an excellent view of the slab
surface to be troweled.

When the machine reaches the end of the slab, make a 180° U-turn and repeat
the straight line of direction to the other end of the slab.

Alternatively, move the machine laterally (sideways) and then travel backward to
the other end of the slab.

The best control of the Ride-On Trowel is achieved at full engine RPM.
Steps for new
operators
Follow the steps below to familiarize a new operator with the Ride-On Trowel.
1. With the operator in the seat, show him or her the functions of the control arms
and how to start the machine.
2. Have the operator practice steering the trowel. A hard concrete slab slightly
wetted with water is an ideal surface on which to practice.
a. Pitch the blades up approximately 6.35 mm (0.25 in.) on the leading edge.
b. Start the engine, and begin by holding (“hovering”) the machine in place.
c. Practice moving the machine forward, backward, and laterally (sideways) in
straight lines, then make a series of 180° turns.
NOTICE

Only experienced concrete finishers should operate the trowel.

Do not use excessive pressure on the control levers. Excessive pressure does
not improve the response time of the machine and can damage the steering
controls.

Attempting to use the trowel too early in the curing state of the concrete may
result in an undesirable finish.