Husqvarna CRT48-33K, Operator'S Manual

Page: 33 / 108

wc_tx002045gb.fm
33
CRT 48-33K Operation
4 Operation
4.1 Preparing the Machine for First Use
1. Make sure all loose packaging materials have been removed from the machine.
2. Check the machine and its components for damage. If there is visible damage,
do not operate the machine. Contact your Wacker Neuson dealer immediately
for assistance.
3. Take inventory of all items included with the machine and verify that all loose
components and fasteners are accounted for.
4. Attach component parts not already attached.
5. Add fluids as needed and applicable, including fuel, engine oil, and battery acid.
6. Move the machine to its operating location.
4.2 Break-in Period
Overview New engines require a break-in period to ensure maximum efficiency. During the
break-in period, the internal components of the engine wear slightly and develop a
tight seal.
The engine in this machine has a 50 hour break-in period.
Operating
during the
break-in
period
Follow the recommendations below while operating the machine during the break-
in period.

Allow the engine to warm up completely before operating the machine in cold
weather.

Change the engine oil and oil filter after 50 hours of operation. See topic Engine
Oil and Filter in the “Maintenance” chapter.