Husqvarna CR 65 2012, Workshop Manual, Page: 34 / 174

D.10
CR 65 2012
MIN
1
3
2
SETTINGS AND ADJUSTMENTS
Workshop Manual Ed. 09-2011
Rear brake fluid level check
The fluid level that can be seen through the inspection window (1) must be above
the minimum mark on the master cylinder tank.
To restore the level loosen the two screws (2), remove the cover (3), and top-up
with oil type specified in the "LUBRICATION AND SUPPLIES" table.
A decrease of the fluid level will let air into the system, hence an extension of
the lever stroke.
If the brake pedal feels mushy when pulled, there may be air in the brake
line or the brake may be defective. CHECK THE BRAKING SYSTEM (see
Section "L").
Too much brake lever free play may reduce braking action: CHECK
BRAKE PAD THICKNESS (see Section "L").
Do not spill brake fluid onto any painted surface or lens (for example
lights lens).
Do not mix two brands of fluid. Completely change the brake fluid in the
brake system if you wish to switch to another fluid brand.
Brake fluid may cause irritation. Avoid contact with skin or eyes. In case
of contact, flush thoroughly with water and call a doctor if your eyes were
exposed.