Husqvarna CR 65 2012, Workshop Manual

Page: 16 / 174

B.2
CR 65 2012
MAINTENANCE
Workshop Manual Ed. 09-2011
ENGINE
After the first 5 hours Every 20 hours Every 40 hours Once a year Before the race
Transmission oil level check ● ●
Transmission oil change ● ●
Spark plug check and/or replacement, electrode gap adjustment ●
Carburettor fastening on intake manifold check ●
Check of flange, intake manifold, and filter bellow condition and seal check ● ●
Idle adjustment (warm engine) ●
Breather pipes conditions and position (without bends) check ●
Reed valve reed check ● ● ●
Clutch plates wear check ● ●
Clutch hub screw tightening check ●
Clutch spring length check ● ●
Cooling system leakage check ●
Cylinder and piston wear check ● ●
Drive shaft axes misalignment check ● ●
Connecting rod big end bearing radial clearance check ●
Connecting rod small end bearing radial clearance check ●
Main bearing wear check ●
Crankshaft and connecting rod big end bearing replacement ●
Gearbox wear check (selector drum and bearings included) ●
Carburettor cleaning and adjustment ●