
D.7
CR 65 2012
3 mm
1
2
3
Workshop Manual Ed. 09-2011
SETTINGS AND ADJUSTMENTS
A decrease of the fluid level will let air into the system, hence an extension of
the lever stroke.
If the brake lever feels mushy when pulled, there may be air in the brake
line or the brake may be defective: CHECK THE BRAKING SYSTEM
(see Section "L").
Too much brake lever free play may reduce braking action: CHECK
BRAKE PAD THICKNESS (see Section "L").
Do not pour brake fluid on painted surfaces.
Do not mix two brands of fluid. Completely change the brake fluid in the
brake system if you wish to switch to another fluid brand.
Brake fluid may cause irritation. Avoid contact with skin or eyes. In case
of contact, flush thoroughly with water and contact a doctor if your eyes
were exposed.
Clutch fluid level check
Check the clutch fluid level as follows:
- Stand the minicross level and upright;
- Loosen the screws (1) and remove cover (2) together with diaphragm (3);
- Make sure the oil level is about 3 mm from the top edge, in case top-up with
oil of the type specified in the "LUBRICATION AND SUPPLIES" table.
If the clutch feels mushy when pulled, there may be air in the brake line or
the brake may be defective: CHECK CLUTCH HYDRAULIC SYSTEM.
Do not spill brake fluid onto any painted surface or lens (for example
lights lens).
Do not mix two brands of fluid. Completely change the brake fluid in the
brake system if you wish to switch to another fluid brand.
Brake fluid may cause irritation. Avoid contact with skin or eyes. In case
of contact, flush thoroughly with water and contact a doctor if your eyes
were exposed.
Summary of Contents for CR 65 2012
