18
19
104 72 57-26
104 72 57-26
14. The needle height
Check
1. Bring needle into its lower turning position.
2. The gap between the upper end of the needle and the surface (B) of the hook ring should
be 29.15 ± 0.2 mm.
The check is executed with a polished needle 90 which is 29.15 mm long.
Order nr. 412 35 29 - 01
Adjustment
1. Bring needle to its lower turning position.
2. Loosen screw (A) and move the needle bar until the correct measure is obtained.
3. Tighten the screw.
NOTE!
Check by means of a twin needle that the needle bar is not twisted. May cause jump
stitches when sewing with a twin needle.
