14
15
104 72 57-26
104 72 57-26
9. The gap between the needle and the hook
Check
1. Set stitch selector for straight stitching.
2. Insert a new needle 90 in the machine.
3. Rotate hand wheel until the point of the hook arrives behind the needle.
Check the gap by pressing a small screw driver against the needle.
The gap should be as small as possible, but max 0.15 mm.
Adjustment
1. If the gap is too large:
Turn screw (A) clockwise and tighten with screw (B).
2. If the gap is too small:
Loosen the screws (B) and (A) and make the gap larger.
Then turn screw (A) clockwise and tighten with screw (B).
NOTE!
Always tighten with screw (B).
Check!
