Husqvarna 226R, Workshop Manual

Page: 5 / 58

Starter
1
6
WARNING!
Protective glasses should be worn when working on the starter to avoid injury to the eyes if,
for some reason, the return spring should fl y out.
WARNING!
Wear protective glasses.
The return spring lies tensioned
in the starter housing and can fl y
out and cause personal injury with
careless handling.
Dismantle the screw holding the starter
pulley.
Carefully lift off the starter pulley so that
the return spring does not fl y away.
Dismantle the screw (A) in the centre of
the starter pulley.
Carefully lift away the starter pulley (B).
WARNING!
Be careful not to injure your thumb
when the starter pulley rotates in
reverse.
Dismantling
Remove the 5 bolts and lift off the starter.
Dismantling
Remove the 5 bolts and lift off the starter.
Loosen the spring tension.
Lift up the starter cord on the starter pulley
and allow it to rotate backwards until the
spring tension ceases
Loosen the spring tension.
Pull out the starter cord about 30 cm.
Slow the starter pulley with your thumb.
Lift the starter cord up out of the cut-out
on the starter pulley.
Let the starter pulley rotate backwards
until the spring tension ceases.