Husqvarna 2014 TE 125 EU, Owner'S Manual

Page: 48 / 128

12 SERVICE WORK ON THE CHASSIS
46
101327-10
Main work
–
Remove screws
1
on the left fork leg. Lift off the fork protector.
–
Remove the screws on the right fork leg. Lift off the fork protector.
12.10 Installing the fork protector
x
101327-10
Main work
–
Position the fork protection on the left fork leg. Mount and tighten screws
1
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Finishing work
–
Install the fork legs. x ( p. 45)
–
Install the front wheel.
x
( p. 75)
–
Install the headlight mask with the headlight. ( p. 83)
–
Check the headlight setting. ( p. 84)
12.11 Removing the lower triple clamp
x
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. ( p. 82)
–
Raise the motorcycle with the lift stand. ( p. 43)
–
Remove the front wheel.
x
( p. 75)
–
Remove the fork legs.
x
( p. 44)
–
Remove the front fender. ( p. 49)
L01624-10
Main work
–
Remove screw
1
. Remove screw
2
, take off the upper triple clamp with the han-
dlebar, and set it aside.
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.
L01623-10
–
Remove O-ring
3
. Remove protective ring
4
.
–
Take out the lower triple clamp with the steering stem.
–
Take out the upper steering head bearing.