Husqvarna 2014 TE 125 EU, Owner'S Manual

Page: 95 / 128

17 TUNING THE ENGINE
93
L01657-10
Main work
–
Place a cloth beneath the carburetor to soak up emerging fuel.
–
Remove screw plug
1
.
–
Completely drain the fuel.
–
Mount and tighten the screw plug.
17.6 Plug-in connection, ignition timing map
L01900-10
Plug-in connection
1
is located in front of the fuel tank on the left side of the frame.
Possible states
• Soft
–
The plug-in connection is disconnected to achieve better rideability.
• Performance
–
The plug-in connection is connected to achieve a better perfor-
mance.
17.7 Changing the ignition timing map
Switch the ignition timing map from Performance to Soft.
–
Disconnect plug-in connection
1
. (Figure L01900-10 p. 93)
Soft
–
Better rideability
Switch the ignition timing map from Soft to Performance.
–
Connect plug-in connection
1
. (Figure L01900-10 p. 93)
Performance
–
Higher performance
17.8 Checking the basic position of the shift lever
0 0 0 A
A
400692-10
–
Sit on the vehicle in the riding position and determine distance
A
between the upper
edge of your boot and the shift lever.
Distance between shift lever and upper
edge of boot
10… 20 mm (0.39… 0.79 in)
» If the distance does not meet specifications:
–
Adjust the basic position of the shift lever.
x
( p. 93)
17.9 Adjusting the basic position of the shift lever
x
401950-12
–
Remove screw
1
and take off shift lever
2
.