11
En
glis
h
01
Press and hold [REV] button for 3 to 5
seconds and release the button 2 to 3 times.
[REV] button pushes the ingredients back up to
dislodge. Reverse rotation continues only when
the button is pressed while the screw stops
when the button is released.
02
After reverse rotation stops completely,
press the [ON] button to run operation.
When pressing the [ON/Extract] or [REV/
Reverse] button, make sure to press it after the
screw stops moving completely.
Precautions
If the juicer does not work after these steps,
unplug the appliance, and disassemble and
clean the parts before operating the juicer
again.
The motor will continue to spin after the
machine is turned off, but it will slow down and
come to a complete halt.
8. When the squeezing screw stops
during normal operation
01
02
01
Pull up the lever inside the hopper knob and open
the lid.
①
Pull up the lever inside the hopper knob, and open
the lid. Overloading the product with ingredients may
damage the product.
02
Insert juicing ingredients below the limit mark of
the hopper.
①
Use watery soft ingredients after mixing them with
others.
②
When juicing in bulk, empty out the chamber and
the pulp container frequently.
03
Close the hopper lid, and keep the juice cap open.
①
Before pressing the ON button, put the juice
container in place.
②
The juice can flow backwards intothe hopper if the
juice cap is closed. If the juice doesn't empty even after
opening the juice cap, open the hopper lid and remove
the contents.
04
Press the [ON] button to start operation.
①
"Clicking" sound upon starting is made when the
chamber set fits with the motor.
05
If you want to add more ingredients during
operation, use the add door on the top or open up the
hopper lid.
①
Operation stops when the hopper lid is open.
②
Do not use any other voltages other than the
designated one.
③
When the screw spins and the ingredients are
not being ground, use the pusher to push down
ingredients.
06
Empty out the pulp container behind the base
frequently in order to prevent the back of the product
to become full with wastes.
07
Let the product run for another minute or so after
the last ingredient goes down through the hopper.
①
It takes some time for the last piece to be extracted
as it is pressed down the product slowly.
②
Run the appliance after the extraction to send out
residual pulp, and it will be easier to disassemble and
clean the hopper.
08
Once the extraction and release of residue is
done, switch off the juicer.
①
The juicer stops 3 seconds after it is switched off.
09
Pour any juice left in the product by tilting the
chamber set forward.
①
For thick juice like tomato juice, it is likely to pool in
the chamber set.
누름
정회전
역회전
작동스위치
정회전
역회전
누름
정회전
역회전
작동스위치
정회전
역회전
정회전
역회전
정지상태
작동스위치
정회전
역회전
off(정지)
정지
4DC010797 사용설명서 통합 H200 Serise 유럽,미국(en,de,fr,es,it,ru,po)_V.02.indd 11
2020-06-12 오전 9:46:35
10
7. How to operate
04
07
05
08
06
09
정회전
역회전
정지상태
작동스위치
정회전
역회전
off(정지)
정지
01
03
02
누름
정회전
역회전
작동스위치
정회전
역회전
누름
정회전
역회전
작동스위치
정회전
역회전
정회전
역회전
정지상태
작동스위치
정회전
역회전
off(정지)
정지
4DC010797 사용설명서 통합 H200 Serise 유럽,미국(en,de,fr,es,it,ru,po)_V.02.indd 10
2020-06-12 오전 9:46:34
