HunterLab SpectraTrend HT, User Manual

Page: 62 / 109

SpectraTrend HT User’s Guide 3.2
62
Figure 69. Smoothing the Data with the Filter Function
PRODUCT SETUP, (TAB) PAGE 4: HEIGHT TRIGGER
When the HEIGHT TRIGGER is selected, the sensor will only flash when the sample is
within in the selected range for MIN and MAX HEIGHT . If the sensor is outside this
range, the sensor will not flash, and no readings are taken. When the HEIGHT TRIGGER
is set to NONE , the sensor will flash regardless of the Min Max Height settings. HEIGHT
TRIGGERING is most useful in PIECE MODE , as the sensor will begin measurements
when the edge is detected. Regardless of the setting, only color measurements that fall
within the boundaries set by the min/max height and color tracking are used in
determining the color measurement. When
EXTERNAL TRIGGERING is selected, the
external trigger must be installed.